Photogrammetry technique:

• Set-up schematic and basics of photogrammetry
• Characteristics, Photogrammetry principle view  
• How to use the photogrammetry results?
• Run #1 report: CMSC conf. (08/2001) paper & slides

Tension test with 6061 T6 specimen (Coupon):

• Specimen (coupon) design (.dwg)
• Some results
• More results (NIU)

 Instrumentation:

• How to use the strain gages?
• Installation of the strain gages.
• Strain gages / (3-element rosettes)/uniaxial
• Installation of strain gages
• Electrical schematic (.xls) 

DAQ:

• 5B backplane (spec)
• Strain gages input modules
• Multimeter , Multiplexer cards
• Amphenol connectors
• Pressure transducer

Test run results: Overview on the set-up
Test #1 @ NIU : R15cm - thickness=130 micron:

Geometry (0.13mm-R15cm) - (.dwg)

Schedule , Budget and material list ,

Scenario used , Conversion of the vol. of water vs. pressure read
        - Finite Element Analysis - Simulation/Calculation
        - Results of the comparison for one case (displacement)
        - Comparison of measurements to FEA (NIU's page)

Test #2 @ NIU : R15cm - thickness=330 micron:

Geometry (0.33mm-R15cm) - (.dwg)
        - Finite Element Analysis - Simulation/Calculation
        - Comparison FEA-Measurements (Donna's page),