Neutrino Factory / Muon Collider (CD)

Pressure test @ NIU - Calculation
Back to the main page



|
------------>X
Results of the numerical analysis for various pressures applied to the windows - Prediction for the pressure test @ NIU - Calculations

Note: As a convention (mm) and (MPa) are the units of the following analysis
Spherical and cartesian coord. system are used. X,Y,Z are shown on the left figure.

Test with 0.12MPa (17.4 PSIg) 

Summary of the results in different coordinate sys. 

Table 1: Distribution along the window radius
Stresses  Displacements
Strains Displacements UX
Shear  

Evolution of the strain vs. the pressure applied to the window 

For stain gage # 1 to 14

Test with 0.04MPa (5.8 PSIg)

Summary of the results in different coordinate sys. 

Table 2: Distribution along the window radius 
Stresses  Displacements
Strains
Shear  


 
Evolution of the displacement along the radius of the window 

For dots located at the same radius (on normal plane) than the strain gages # 1 to 14



Legal Notices